Client PVC Manufacturer

Location Tarragona, Spain

Sectors Petrochemical and refining

The Challenge

Improve the capacity of a polymerisation reactor

Summer is when PVC demand peaks. One of the most prominent manufacturers wanted to take advantage of this opportunity,but needed to increase the cooling of their batch reactor, which was equipped with an external jacket and a reflux condenser.

Heat generated by the polymerisation process is removed by cooling water, which is circulated within the jacket. Evaporation techniques are also used to lower the heat by using vinyl chloride inside the reflux condenser atop the reactor.

The PVC manufacturer needed an experienced partner who could integrate a cooling package within the current system.

Project fact file

2 x

Air cooled chillers

1600 kW

Of power

The Solution

Aggreko Process Services makes an analysis of the process to find the best solution

Our expert team simulated operating conditions in order to find the most optimised process to help the customer. After extensive test runs, it was evident that the most efficient method to keep the correct temperature was to chill the condenser inlet cooling water.

To achieve this, two air condensed chillers would be required, as well as a constant presence to monitor the temperature so changes could be adapted to.

The Aggreko Difference

We help you rise to meet demand

Download this case study

The Impact

Production increase up to 15%

Thanks to our temperature control expertise and modular equipment, the customer could upscale production during the rise in demand. Our solution was perfectly synchronise with the customer’s current processes too. The package delivered exactly what the customer needed and production increased as far as 15%.

A study looking into using the same solution for other reactors will happen in the future too, highlighting how our involvement was the ideal partner for the customer

This is the closest office that can serve you

We’ll help you find what’s right for you